Surface Sealer

Superseal

A durable, water-based general-purpose sealer for slate, sandstone, brick and paving.

Key benefits

Durable, water-based formula
Seals slate, sandstone, brick & paving
Simple water-bead test confirms coverage
Second coat available for a stronger finish
Cures fully within 12 hours

Directions for use

01 Surface must be dry, clean & free of dust, loose particles and flaking material.
02 Apply 5 days after installation with a roller paint brush — it secures even, consistent coverage.
03 Saturate the surface; thoroughly inspect and seal all pin-holes & imperfections.
04 After 3 hours, test with water droplets — beading confirms sufficient sealer was applied.
05 A second coat may be necessary for a satisfactory result.
06 Cures fully within 12 hours.

Where it's used

Concrete, plaster, brickwork, concrete aprons, paving, retaining walls, concrete flooring, parapet walls, clay & cement roof tiles, and grouting between tiles.

Safety

Do not ingest.
Do not dispose of into sewers.
Keep out of reach of children.
Avoid spillage or overspray on aluminium, alloys or glazing.
Do not damage the container; keep closed when not in use.
Store in a cool, dry place.

All recommendations are based on in-field use experience and are, to the best of our knowledge, accurate. As conditions of actual use are beyond our control, all recommendations are made without warranty.

Have a question about this product? Ask us on WhatsApp or call the store.

Manufactured by Stone Library Head Office — 231 Malibongwe Drive (cnr Ascot Avenue), Northriding, Randburg, 2126 · 010 594 2083 · store@stonelibrary.co.za